Products >>Prepared Wax Blends

Prepared Wax Blends :

SL No Characteristics Unit Parameters Results
1     Drop melting point °C 116 - 120 118
2 Saponification No mg/KOH/g 0 - 1 0.2
3     Colour (Max) ASTM White (0.0) 0
4 Needle Penetration, 1/10mm (25°C, for 5 Sec with 100g) dmm 1 - 5 1.0
5     Viscosity at 120°C Cps 13 - 20 18
6     Density at 23°C gm / cm3 0.95 - 0.98 0.96
7     Odour (When Cold) --- None None
8     Acid No. mg/KOH/g 0 0
9     Ash Content % Mass < 0.01% 0.006%
10 Specific Gravity at 25°C Mass 0.94 - 0.97 0.95
11  Appearance --- White Flakes (Solid) White
         / Powder Powder
Packing : In PP Bag of 25 Kg net wt each    
NON-WARRANTY OF RESULTS (Please use after tests and approval)  
No warranties,  express  or  implied, or  warrenties  of merchantability  or  fitness  for a particular use, are made by
Chowdhary Udyog  with  respect to any  products  described or information set forth herein. Our recommendations
for its  use are  purely based on tests  believed  reliable. The sample  unless specified  as IP is meant for industrial
use only. Since  the  use  is  beyond  our  control  we  do  not  guarantee  the  results  whether or not such use is in
accordance  with  directions. It is  also understood  that  the quality and specification of the sample are typical only
The  information  presented  herein is based on  the  evaluation  carried  out  in  our  in  house  Lab & on  the tests
carried out by outside inspection agencies and the data available therefrom and believed to be correct.


All Rights reserved with Chowdhary Udyog. | sketch |2010.