Products >>MCW IOCU SW 1010


SL No Characteristics Unit Method Normal Results
1     Drop melting point °C IP-133 /ASTM D-127 79 to 82
2     Oil content (Max) %mass IP-158 /ASTM D-721 Below 2
3     Colour (Max) --- ASTM D-1500 0
4 Needle Penetration, 1/10mm (25°C, for 5 Sec with 100g) --- P:93 / IP:49 / ASTM 1321 30 to 35
5     Viscosity at 98.9°C Cst P:25  24
6  Flash Point, COC, (Min) °C ASTM D-92 260 to 275
7     Odour --- Physical Odourless
8     Acidity (Inorganic) mgKOH/g P:2 0
9     Ash Content % Mass IP 223 0.01
10 Congealing Point °C ---- 70
11 UV visible Absorbtion       
    Path length (Max):      
    280-289 Millimicrons nm   0.08
    290-299 nm ASTM 0.06
    300-359 nm D-2008 0.05
    360-400 nm   0.02
12     Toxic & Dermatic Action --- Non Toxic & Non Dermatic Complies (Passes)
13 Melting Point °C ---- 73
14  Appearance --- Visual Slabs
           Free from foreign Particals
Packing: 5 slabs per carton, each slab weighing about 5.2 Kg Each carton 26 Kg net
NON-WARRANTY OF RESULTS (Please use after tests and approval)
No warranties, express or implied, or warrenties of merchantability or fitness for a particular use, are made
by Chowdhary Udyog with respect to any products described or information set forth herein. Our recomme -
- ndations for its use are purely based on tests believed reliable. The sample unless specified as IP is meant
for industrial use only. Since the use is beyond our control we do not guarantee the results whether or not
such use is in accordance with directions. It is also unedrstood that the quality and specification of the sample
are typical only. The information presented herein is based on the evaluation carried out in our in house Lab & on the 
tests carried out by outside inspection agencies and the data available therefrom and believed to be correct.
Quality comparable to Witco's (USA) "W 445", Schumann Sasol's (Germany) "3971" & Honeywell's (USA) "OK-139"


All Rights reserved with Chowdhary Udyog. | sketch |2010.